Automotive Repair Information

Engine marking defines as the marking that must be set in order to get a good firing systems to make the engine starts.There are a few components involved such as timing bearing,timing belt,crankshaft pulley and timing belt pulley. There are a few rules that must be followed to set the engine marking. 1) Must put the upper pulley mark accurately with distributor arm or rotor arm mark. 2) Must put the lower pulley mark accurately with the crankshaft mark. 3) When putting the timing belt clip make sure the upper pulley mark and the down pulley mark still at the same place so that the engine can easily start after installation. 4) Make sure putting the upper and lower timing oil seal properly to prevent any engine oil leaks. 5)Make sure upper pulley tighten properly and close it by timing cover.

Considering car servicing also part of troubleshooting process in car problems ,we have to be more careful in tackling these service process.As everyone knows it has a specific part to be changed in completing this service process such as engine oil,oil filter and the air filter.However the car user left out a few things that need to be checked and well maintained before they leave any workshop.There are about 10 items need to be checked and also considered as part of servicing process. Normally in a good workshop service this 10 items being implemented but they never let the car user know and it seems to be not important for everyone to know. The cause of not taking care of this 10 essentials items car user seldom to have car breakdown even just a few minutes or hours sending for car service.The 10 items are:- 1)Battery water-Never checked or let the mechanic know about the battery water need to be fill up to the appropriate level. 2)Radiator water-This also need to be ...